AMX Modero MVP-5200i Operation/Reference Manual page 72

Protected Setup Pages
System Settings Page
The System Settings page (FIG. 57) displays sets the NetLinx Master's communication settings.
FIG. 57 System Settings page
The elements of this page include:
System Settings Page Elements
Back:
Connection Status icon:
IP Settings:
Master Connection:
Type
64
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Switches the IP settings between DHCP and Static. DHCP means that the IP
address and the subnet mask fields are greyed out; in Static, press either of the
fields to open the IP Address and Subnet Mask keypads.
Sets the NetLinx Master communication values:
Sets the NetLinx Master to communicate with the panel via Ethernet, USB,
Mesh, or ICSNet. This is based on the cable connection from the rear.
• Ethernet is a CAT-5 cable (10/100Base T terminated in an RJ-45 connector)
used to network computers together and is used in most LAN (local area
networks). This description is also used to refer to both wired and wireless
communication. A Wireless Ethernet connection involves indirect
communication from the panel to a Master via a wireless connection to the
network.
• A USB connection is a direct connection from the panel's mini-USB port to a
corresponding USB port on the PC (acting as a Virtual Master).
MVP-5200i Modero Viewpoint Widescreen Touch Panel