AMX Modero MVP-5200i Operation/Reference Manual page 133

"^" Button Commands (Cont.)
^BMF
Set any/all button
parameters by
sending
embedded codes
and data.
MVP-5200i Modero Viewpoint Widescreen Touch Panel
Syntax:
"'^BMF-<vt addr range>,<button states range>,<data>'"
Variables:
variable text address char array = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
level range = 1 - 600 (level value is 1 - 65535).
data:
'%R<left>, <top>, <right>, <bottom>' = Set rectangle.
'%B<border style>' = Set the border style name. See the Border Styles and
Programming Numbers table on page 117.
'%B',<border 0-27,40,41> = Set the borer style number. See the Border Styles and
Programming Numbers table on page 117.
'%DO<1-5><1-5><1-5><1-5><1-5> = Set the draw order. Listed from bottom to top.
Refer to the ^BDO command on page 122 for more information.
'%F',<font 1-8,10,11,20-29,32-xx> = Set the font. See the Default Font Styles and ID
Numbers table on page 116.
'%F<font 01-08,10,11,20-29,32-xx>' = Set the font. See the Default Font Styles and ID
Numbers table on page 116.
'%MI<mask image>' = Set the mask image. Refer to the ^BMI command on page 127 for
more information.
'%R = Sets button location and also resizes the button. Takes four parameters: left, top,
right, bottom.
'%T<text >' = Set the text using ASCII characters (empty is clear).
'%P<bitmap>' = Set the picture/bitmap filename (empty is clear).
'%I',<icon 01-9900, 0-clear>' = Set the icon using values of 01 - 9900 (icon numbers are
assigned in the TPDesign4 Resource Manager tab - Slots section).
'%I<icon 01-9900, 0-clear>' = Set the icon using values of 01 - 9900 (icon numbers are
assigned in the TPDesign4 Resource Manager tab - Slots section).
'%J',<alignment of text 1-9> = As shown the following telephone keypad alignment
chart:
0
1
2 3
4 5 6
7 8 9
'%JT<alignment of text 0-9>' = As shown the above telephone keypad alignment chart,
BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
'%JB<alignment of bitmap/picture 0-9>' = As shown the above telephone keypad
alignment chart BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
'%JI<alignment of icon 0-9>' = As shown the above telephone keypad alignment chart,
BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
Zero can be used for an absolute position
Programming
125