4.9 Frequency/Voltage Control
This section shows the user how to configure the processor frequency.
4.9.1
Auto Detect PCI CLK
This field enables or disables the auto detection of the PCI clock.
4.9.2
Spread Spectrum
This field sets the value of the spread spectrum. The default setting is Dis-
abled. Leave this field in its default setting. Do not alter this setting unless
advised by an engineer or technician.
4.9.3
CPU Host/3V66/PCI Clock
Leave this field in its default setting. Do not alter this setting unless
advised by an engineer or technician.
Figure 4.13: Frequency/Voltage Control
51
Chapter 4