The screen shown above, which list all the fields available in the Super IO
Device submenu for ease of reference in this manual. In the actual CMOS
setup, you have to use the scroll bar to view the fields. The settings on the
screen are for reference only. Your version may not be identical to this
one.
4.6.4.1 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to
the onboard floppy disk drive connector instead of a separate controller
card. If you want to use a different controller card to connect the floppy
disk drives, set this field to Disabled. Note: ARK-3384 series embedded
box computer does not support interface connection.
4.6.4.2 Onboard Serial Port 1
You can disable the COM1 serial port by selecting "Disabled", select the
"Auto" to allow the BIOS to arrange a suitable resource value for your
COM1 device connection automatically, or you can select the resource of
IRQ/IO Address combination for your COM 1 serial port device connec-
tion. The setup value options are:
Disabled
3F8/IRQ4
2FB/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
The default setup value of COM1 (Onboard Serial Port 1) is "3F8/IRQ4".
4.6.4.3 Onboard Serial Port 2
You can disable the COM2 serial port by selecting "Disabled", select the
"Auto" to allow BIOS arrange a suitable resource value for your COM2
device connection automatically, or you can select the resource of IRQ/
IO Address combination for your COM 1 serial port device connection.
The setup value options are:
Disabled
3F8/IRQ4
2FB/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
ARK-3384 User Manual
44