Pnp/Pci Configurations; Frequency/Voltage Control - Advantech ARK-4180 User Manual

3.2.7

PnP/PCI Configurations

Note! The "PnP/PCI Configurations" option is used to set up the IRQ and DMA
(both PnP and PCI bus assignments) options.
Init Display First
This setting is to start up Video output from PCI or Onboard device.
Reset Configuration Date
This setting allows users to clear any PnP configuration data stored in the BIOS.
Resources Controlled By
– IRQ Resources
This item allows users to respectively assign an interrupt type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows users to respectively assign an interrupt type for DMA, 0, 1, 2,
3, 4, 5, 6, and 7.
PCI VGA Palette Snoop
The item is designed to solve problems caused by some non-standard VGA cards. A
built-in VGA system does not need this function.
INT Pin 1~8 Assignment
The interrupt request (IRQ) line assigned to a device connected to the PCI interface
on your system.
3.2.8

Frequency/Voltage Control

ARK-4180 User Manual
[PCI Slot]
[Disabled]
[Auto (ESCD)]
[Disabled]
[Auto]
28