General Specifications; Printing - Brother HL-2400C Service Manual

2.

GENERAL SPECIFICATIONS

2.1.

Printing

Print method:
Resolution:
Print speed:
Warm-up:
First print:
Print media:
Note: These figures are based on an average of 5% coverage of the printable area for
one color using laser paper. The frequency of replacement will vary, depending
on the complexity of the prints, the percentage of coverage, and the type of
media. Transparencies, glossy coated paper and other special media will result
in shortened consumable life.
Resident Printer Fonts:
Electrophotography by semiconductor laser beam scanning
300 x 300 dots per inch (Normal)
600 x 600 dots per inch (Fine)
The resolution can be enhanced to 2400 dpi class by using the
HRC(High Resolution Control) and CAPT (Color Advanced Photoscale
Technology) features.
Monochrome mode:
Full color mode:
Max. 3 minute at 20°C (68°F)
Monochrome mode:
Full color mode:
(when loading A4/Letter-size paper by face down print delivery from
standard upper cassette feed)
Toner in a single-color single-component cartridge
Life Expectancy: 10,000 single-sided pages/cartridge (Black)
6,000 single-sided pages/cartridge (Cyan,
Magenta, Yellow)
<HP PCL, EPSON FX-850, and IBM Proprinter XL modes>
66 scalable fonts and 12 bitmapped fonts
<BR-Script Level 2 mode>
66 scalable fonts
16 page/minute (A4/Letter-size)
4 page/minute (A4/Letter-size)
19 seconds or less
30 seconds or less
II-2