Brother HL-2400C Service Manual page 234

9) Remove the set screws BT3X8 (4 pcs.) from the paper exit guide unit.
10) Remove the top cover (paper exit cover) from the paper exit guide unit.
Top Cover
(Paper Exit Cover)
Note:
•
When re-assembling, ensure the hooks are fitted facing in the correct direction on the
release arm. The two hook assembly sliders are of different widths to ensure correct
assembly. (Refer to Fig.7-59 below.)
Hook(R)
•
When refitting the paper exit inner cover, fit it onto the top cover while holding the
release arm in position with a screw driver for easier and correct assembly.
Paper exit
guide unit
Fig.7-58
Fig.7-59
VII-35
Hook(L)
Spring