Brother HL-2400C Service Manual page 322

REPEAT TESTPRINT
NV-RAM CLEAR
READOUT SELECT
FONT SELECT
TEST PATTERN = WHITE
prints 1 page and exits to ONLINE
TEST PATTERN = NORMAL*
TEST PATTERN = GRID
TEST PATTERN = LINE
TEST PATTERN = BLACK
TEST PATTERN = WHITE
prints continuously, press SEL to stop printing (OFFLINE)
press CONT to resume printing (ONLINE)
press SHIFT & RESET to exit printing
SURE? (SET/ELSE) NV-RAM Clear
READOUT = ON Enable or Disable DC3 in Epson emulation
READOUT=OFF*
IBM CHR SET MODE
IBM E1H=beta E1H will be printed as beta
IBM E1H=ESSZET* E1H will be printed as esszet
W BOLD ON/OFF
W BOLD=OFF* Disable bold in double strike printing mode in IBM & EPSON
W BOLD=ON Enable bold in double strike printing mode in IBM & EPSON
DLFNT Bd/It
DLFNT Bd/It=YES Enable bold and italic from the downloaded fonts
DLFNT Bd/It=NO* Disable bold and italic from the downloaded fonts
B PROD ON/OFF
B PROD=ON* Enable bold and italic from the bit map fonts
B PROD=OFF Disable bold and italic from the bit map fonts
CONDENSE SELECT
CONDENSE=16.66*Set condensed print to 16.66 cpi
CONDENSE=17.14 Set condensed print to 17.14 cpi
OEM FONT SELECT
OEM FONT=DISABLE* Disable OEM font selection
OEM FONT=ENABLE E nable OEM font selection
BRO FONT SEL
BROBITM=DISABLE* Disable internal 10/12 bit map Brougham font
BROBITM=ENABLEEnable internal 10/12 bit map Brougham font
ISR FONT SELECT
ISRFONT=DISABLE*
ISRFONT=ENABLE
300DPI PRIORITY
3B PRIO=LOW 300dpi bitmap priority normal
A-19