Iod2 Pcb (With Base) - Brother HL-2400C Service Manual

4.1.6

IOD2 PCB (with base)

1) Disconnect all the harness connectors (13 pcs.) connected to the IOD2 PCB.
2) Remove the set screws ST3X6 (2 pcs.) from the IOD2 PCB base.
3) Remove the IOD2 PCB (with base) from the main body.
When handling the IOD2 PCB take care not to cause electrostatic damage to the PCB.
Fuser clutch
Cleaner clutch
C ring
C ring
Registration clutch
Fig.7-10
PRECAUTION
Fig.7-11
VII-10
C ring
IOD2 PCB