Brother HL-2400C Service Manual page 151

44 LIFE PERIOD
Replacement life of the periodical replacement parts can be set.
Note:
It is recommended to use the default value in normal use. Do not adjust these settings
without authorization.
Procedure
Description of Procedures
1) Press the Continue button after selecting
Screen (a) "LIFE PERIOD" mode.
2) Using the Set or
code to be set and then press the Continue
button.
2: Fuser Cleaner
7: OPC Belt Cartridge
8: Fusing Unit
9: 120K Replacement Kit
3) Use the Set or
digit.
Use the Continue button to input a new value
to the selected (blinking) digit.
Upon completion of inputting the values to be
set, use the Set or
the LCD and then press the Continue button
to register the set value.
4) Press the Font button to complete the setting
work.
5) Press the Font button one more time to
return to FACTORY MODE. (g) → (h)
(a) → (b)
button, select the desired
(a) → (b)
(d)
(e)
(f)
button to select the desired
button to select SET on
(g)
V-30
LCD Message
39 FACTORY MODE
a)
LIFE PERIOD SET
44 LIFE PERIOD
b)
No.=<123456789>
PERIOD FC ROLL
c)
012000 P SET
PERIOD BC UNIT
d)
05000 P SET
PERIOD FU UNIT
e)
040000 P SET
PERIOD 120K UNIT
f)
120000 P SET
44 LIFE PERIOD
g)
No.=<123456789>
39 FACTORY MODE
h)
DP CHECK