Brother HL-2400C Service Manual page 250

Display Message
T1 MANUAL FEED
***** SIZE
19 CHECK FONT
20 FONT REMOVAL
22 WASTE TONER
23 OIL EMPTY
24 CHANGE FCR
25 NO FUSER UNIT
27 NO OPC BC
28 NO FC ROLLER
72 CHANGE FILTER
TONER LOW XXXX
FUSER OIL LOW
REPLACE FCR
REPLACE OPC BC
REPLACE FUSER
REPLACE 120K KIT
REPLACE FILTER
Meaning
Request to load paper
manually. (The
message appears
alternately to show a
particular size.)
An error occurred in
the optional font card.
Font card removed
while the printer is on-
line.
Waste toner pack full
of toner
No oil in the oil bottle
Change the fuser
cleaner.
Fusing unit not
installed
OPC belt cartridge not
installed
Fuser cleaner not
installed
Change the ozone
filter.
The toner of the color
indicated by XXXX is
nearly empty.
Oil in the oil bottle is
almost empty.
Change the fuser
cleaner.
Change the OPC belt
cartridge.
Change the fusing
unit.
Change the drum
cleaner, paper
discharger and
transfer roller.
Change the ozone
filter.
VIII-4
Countermeasure
Load the requested size of
paper into the standard
media cassette and press the
Select button.
Turn off the printer, and
reinstall or replace the
optional font card.
Turn off the printer, re-install
the font card, and turn on the
printer. The Continue button
will allow you to temporarily
ignore this message.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Remove fusing unit and then
refit it. Confirm correctly
installed and clamped.
Remove the OPC belt
cartridge and then refit it.
Confirm correctly installed
and locked.
Remove fuser cleaner and
then refit it. Confirm correctly
installed and clamped.
Replace with a new one.
Replace the toner cartridge
which has nearly run out.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with new ones.
Replace with a new one.