Show Isis Fast-Reroute-Topology; Show Isis Hostname - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv4 Routing Volume I)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
124 Confidential and Proprietary Information of ZTE CORPORATION
Field
Area Address
NLPID
Hostname
IP address
Inter-Domain Info
Authentication type
show isis fast-reroute-topo
logy
Use this command to display information about the topology of
fast reroute.
All modes
show isis fast-reroute-topology {[level-1][level-2]}[vrf <vrf
-name>]
level-1
level-2
vrf <vrf-name>
This command is supported after the platform version 4.8.02.
This example shows how to display information about the topology
of fast reroute.
gar15#show isis fast-reroute-topology level-1
IS-IS ipfrr paths to Level-1 routers
System id Interface
0001.0000.0001 interface fei_1/1
down-stream-path 10

show isis hostname

To display the router-name-to-system-ID mapping table entries
for an Intermediate System-to-Intermediate System (IS-IS)
router, use the show isis hostname command.
All modes
Description
Reachable area address from the router
Network Layer Protocol identifier
Host name
IPv4 address for the interface
Inter-Domain information (tag)
Type of authentication
The router is in area level-1
The router is in area level-2
VRF name, 1~16 characters
Ipfrr interface Ipfrr type
interface fei_1/1
metric