Device Setup & Configuration; Figure 2.4 Device Manager Dialog Box; Figure 2.5 "Device Found" Dialog Box - Advantech PCI-1730U User Manual

2.5 Device Setup & Configuration
The Advantech Device Manager program is a utility that allows you to set up, config-
ure and test your device, and later stores your settings on the system registry. These
settings will be used when you call the APIs of Advantech Device Drivers.
Setting Up the Device
1. To install the I/O device for your card, you must first run the Device Manager
program (by accessing Start/Programs/ Advantech Device Drivers V1.5).
2. You can then view the device(s) already installed on your system (if any) on the
Installed Devices list box. Since you haven't installed any device yet, you might
see a blank list such as the one below (Fig. 2-4).
3. Scroll down the Supported of Devices box to find the device that you wish to
install, then click the Add... button to evoke the Existing unconfigured PCI-
1730U dialog box such as one shown in Fig. 2-5. The Existing unconfigured
PCI-1730U dialog box lists all the installed devices on your system. Select the
device you want to configure from the list box and press the OK button. After
you have clicked OK, you will see a PCI-1730U Device Setting dialog box such
as the one in Fig. 2-6.
PCI-1730U/1733/1734 User Manual

Figure 2.4 Device Manager Dialog Box

Figure 2.5 "Device Found" Dialog Box

14