Before Using Gige Vision Camera - JAI AT-200GE User Manual

Before using GigE Vision camera

All software products described in this manual pertain to the proper use of JAI GigE Vision
cameras. Product names mentioned in this manual are used only for the explanation of
operation. Registered trademarks or trademarks belong to their manufacturers.
To use the JAI SDK, it is necessary to accept the "Software license agreement" first.
This manual describes necessary equipment and the details of camera functions.
Equipment to be used
In order to set up the GigE Vision system, use the following equipment or equivalent.
It is necessary to use a PC and peripherals which comply with Gigabit Ethernet requirements.
1. Camera(s) which comply with GigE Vison and GenICam
2. Power supply for camera
3. Network cable (CAT5e or CAT6)
4. Computer
5. Network adapter (note 1)
6. Network HUB (if needed)
7. Trigger switch (If needed)
8. JAI SDK (Software Development kit)
Note:
Pentium 4 type PC is not recommended due to dependency on chip set bus performance.
Note1: At the time of publishing this document these combinations have been verified:
NIC Model
manufacturer
Intel PRO/1000MT
(PWLA8490MT)
Intel PRO/1000GT
(PWLA8391GT)
Intel PRO/1000PT
(EXPI9300PT)
Intel Gigabit CT
Desktop adaptor
(EXPI9301CT)
Intel PRO/1000PT Quad
port
(EXPI9404PT)
Intel PRO/1000PT
port
(EXPI9402PT)
The above NICs are verified under the following conditions.

CPU:Intel Core 2 Duo, 2.4GHz

2 GB memory

Windows XP, SP2(32 bit)

Driver: Filter driver supplied with JAI SDK
AT-200GE
CPU: Intel Core Duo 2 2.4GHz or more
Memory: 2GB (recommended)
Video card: PCI Express Bus x 16 connection
VRAM : DDR2 with 256MB or more
DVI : capable of display 2560 x 1600 pixels
PCI Bus
 (33MHz)
 (33MHz)



Dual

- 5 -
PCI-X Bus PCI-Express Bus
(100MHz)
 (33MHz)






 ( x1 )
 ( x1 )
 ( x4 )
 ( x4 )