Gvsp_Pix_Rgb10V1_Packed (Rgb 32Bit Output); Gvsp_Pix_Rgb10V2_Packed (Rgb 32Bit Output); Functions And Operations; Gige Vision Standard Interface - JAI AT-200GE User Manual

Digital 3ccd progressive scan rgb color camera
Hide thumbs

Advertisement

Table of Contents

8.2.2 GVSP_PIX_RGB10V1_PACKED (RGB 32bit output)

1 Byte
2 Byte
R0
G0
B0
0 1
0 1
0 1
X X 0 1 2 3 4 5 6 7

8.2.3 GVSP_PIX_RGB10V2_PACKED (RGB 32bit output)

1 Byte
2 Byte
R0
0 1 2 3 4 5 6 7 8 9
Address
Internal Name
0xA410
Pixel Format type

9. Functions and Operations

9.1. GigE Vision Standard Interface

The AT-200GE is designed in accordance with the GigE Vision standard. Digital images are
transmitted over Cat5e or Cat6 Ethernet cables. All camera functions are also controlled via
the GigE Vision interface.
The camera can operate in Continuous mode, providing an endless stream of images. For
capturing individual images related to a specific event, the camera can also be triggered. For
precise triggering, it is recommended to use a hardware trigger applied to the Hirose 12-pin
connector. It is also possible to initiate a software trigger through the GigE Vision interface.
However, when using a software trigger, certain latency inherent to the GigE interface must
be expected. This latency, which manifests itself as jitter, greatly depends on the general
conditions and traffic on the GigE connection. The frame rate described in this manual is for
the ideal case and may deteriorate depending on conditions.
When using multiple cameras (going through a switch and/or a single path) or when operating
in a system with limited transmission bandwidth the Delayed Readout Mode and Inter-Packet
Delay functions can be useful.

9.2. Recommended Network Configurations

Although the AT-200GE conforms to Gigabit Ethernet (IEEE 802.3) not all combinations of
network interface cards (NICs) and switches/routers are suitable for use with the GigE Vision
compliant camera.
JAI will endeavor to continuously verify these combinations, in order to give users the widest
choice of GigE components for their system design.
AT-200GE
3 Byte
4 Byte
R0
0 1 2 3 4 5 6 7
3 Byte
4 Byte
G0
0 1 2 3 4 5 6 7 8 9
Access
R/W
- 24 -
G0
0 1 2 3 4 5 6 7 8 9 X X
Size
0x02180014:RGB8Packed
4
0x0220001C:RGB10V1Packed
0x0220001D:RGB10V2Packed
B0
0 1 2 3 4 5 6 7
B0
Value

Advertisement

Table of Contents
loading

  Related Manuals for JAI AT-200GE

Table of Contents