4.2. Rear panel indicator
The rear panel mounted LED provides the following information:
Amber: Power connected - initiating
Steady green
: Camera is operating in Continuous mode
Flashing green : The camera is receiving external trigger
Ethernet connector indicates,
Steady green
: 1000 Base-T has been connected
Flashing green : 100 Base-TX has been connected (Note)
Flashing amber : Network active in communication
Note: When 10BASE-T is connected, the green is also flashing.
However, the video is not streamed through Ethernet.
AT-200GE
- 9 -
Fig.2 Rear Panel