Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
5
C h a p t e r
LFAP Configuration
Table of Contents
lfap enable .......................................................................28
lfap disable .......................................................................29
lfap fas-server ..................................................................29
lfap ka-interval..................................................................30
show lfap config ................................................................33
lfap backup-server1
Use this command to configure the address of the backup server
1 of lfap. Delete the setting with the no form of this command.
Global configuration
lfap backup-server1 [{mng |<vrf><word>}]<A.B.C.D>
no lfap backup-server1
mng
<vrf>
<word>
<A.B.C.D>
Use this command to specify the address of FAS backup server 1
with the LFAP function.
This example describes how to set the address of lfap backup
server 1 to 192.1.1.120.
Confidential and Proprietary Information of ZTE CORPORATION
Indicates LFAP functional module is connected
to the FAS server through the network
management interface of the device
Indicates LFAP functional module is connected
to the FAS server through the specified vrf
interface
VPN name to whivh the vrf interface belongs
FAS server address
27