Cluster Installation Flow - Zte ZXR10 T8000 Hardware Installation Manual

ZXR10 T8000 Hardware Installation Guide (Cluster)
Physical Parameter
AC power supply
Cooling system
Operational
environment
requirements
Storage environment
requirements
Grounding resistance
Note:
If the altitude is below 1800m, the long-term operating temperature is 40°C and the
short-term operating temperature is 50°C.
If the altitude is above 1800m, the maximum temperature of the operating environment
decreases by 0.5 ℃ for every 100-meter increase in altitude. The maximum supported
altitude is 5000m.

1.4 Cluster Installation Flow

This topic describes how to install ZXR10 T8000 cluster 1+4 and cluster 2+8. The
installation flow of the two clusters is basically the same, as shown in
SJ-20110901170352-005|2011-10-15 (R2.0)
Backup mode
Rated power per machine
Rated input voltage
Input frequency range
Rated output voltage
Rated output current
Rated output power per
module
Number of horizontal fan
modules
Number of fans in horizontal
fan modules
Backup mode
Variable rate control mode
Heat dissipation
Temperature
Humidity
Altitude
Temperature
Humidity
1-8
ZXR10 T8000
4+4
5100W
200V - 240V
50Hz - 60Hz
-53.5V
NA
2000W/module
2
9
1+1
Supported
13923 BTU/hour
-5℃ - 50℃
5% - 90%
<5000m
-40°C - +70°C
0 - 95%
The grounding resistance in case of joint
grounding is less than 5Ω.
Figure
ZTE Proprietary and Confidential
1-5.