Snmp-Server Group - Zte ZXR10 Command Manual

ZXR10 Command Manual (Network Management Volume)
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
12 Confidential and Proprietary Information of ZTE CORPORATION
no snmp-server engine_id
<engine-id>
This command is supported after the platform version 4.6.02.
The following example shows how to configure the snmp engine
ID on the local device to be 12345667890.
ZXR10(config)#snmp-server engine-id 12345667890
show snmp engine-id

snmp-server group

Use this command to configure a new Simple Network Manage-
ment Protocol (SNMP) group, or a table that maps SNMP users to
SNMP views. Remove a specified SNMP group with the no form of
this command.
Global configuration
snmp-server group <groupname> v3 {auth | noauth | priv
}[context <context-name> match-prefix | match-exact][read
<readview>][write <writeview>][notify <notifyview>]
no snmp-server group <groupname> v3 {auth | noauth |
priv}
<groupname>
v3
auth
noauth
priv
context
match-prefix
match-exact
read <readview>
Local SNMP engine ID, 1~24 char-
acters. The default value is
830900020300010289d64401. It must
be expressed with a hexdecimal number
Configured group name, with 1~32 characters
Specifies a group that uses the SNMP Version
3
Specifies authentication of a packet without
encrypting it
Specifies no authentication of a packet
Specifies authentication of a packet with
encryption
Specifies the SNMP context to associate with
this SNMP group and associated views
Specifies the context match mode as prefix
match
Specifies the context match mode as accurate
match
Specifies a read view string, with 1~32
characters