Auxiliary Function - Zte ZXR10 Command Manual

ZXR10 Command Manual (Network Management Volume)
2 Confidential and Proprietary Information of ZTE CORPORATION
different parameter ranges or default values, an additional
form is used for description.
� Default
The default value is available in the case that this command is
not set. The default parameter value is not described here for
value selection.
Additional description shall be given if different products have
different default values.
� Instructions
First describes the platform version information about this
command. For example, "The platform version X.X.XX or later
supports this command" indicates this command is provided
from the beginning of the platform version X.X.XX. This com-
mand is provided from the platform version 2.6 by default.
Second describes the use method and precautions of this com-
mand.
� Example
It describes the use of this command in an example.
� Related Commands
Lists the command(s) related to this command.
� History Command
It describes history version information related to this com-
mand if a command is changed after version upgrade.
Do not describe the history command if this entry does not exist.

Auxiliary Function

The auxiliary function for ZXR10 devices is as follows.
1. In any command mode, enter a question mark (?) after the
DOS prompt of the system, a list of available commands in the
command mode will be displayed. With the context-sensitive
help function, the keywords and parameter lists of any com-
mands can be obtained.
i. In any command mode, enter a question mark "?" after the
DOS prompt of the system, and a list of all commands in
the mode and the brief description of the commands will
be displayed.
ii. Input the question mark behind a character or character
string to view the list of commands or keywords beginning
with this character or character string. Note that there is
no space between the character (string) and the question
mark.
iii. Press TAB behind the character string. If the command or
keyword beginning with this character string is unique, it
shall be completed with a space at the end. Note that there
is no space between the character string and the TAB.