Safety Information And Recommended Training For Radio Controlled Equipment Operators - Magnetek Flex 12EX System Instruction Manual

2.4 SAFETY INFORMATION AND RECOMMENDED TRAINING FOR
RADIO CONTROLLED EQUIPMENT OPERATORS
Anyone being trained to operate radio controlled equipment should possess as a minimum the following knowledge and
skills before using the radio controlled equipment.
The operator should:
 have knowledge of hazards pertaining to equipment operation
 have knowledge of safety rules for radio controlled equipment
 have the ability to judge distance of moving objects
 know how to properly test prior to operation
 be trained in the safe operation of the radio transmitter as it pertains to the crane, hoist, lifting device or other
material handling equipment being operated
 have knowledge of the use of equipment warning lights and alarms
 have knowledge of the proper storage space for a radio control transmitter when not in use
 be trained in transferring a radio control transmitter to another person
 be trained how and when to report unsafe or unusual operating conditions
 test the transmitter emergency stop and all warning devices prior to operation; testing should be done on each
shift, without a load
 be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting device, or other
material handling equipment that utilizes the radio control
 know how to keep the operator and other people clear of lifted loads and to avoid "pinch" points
 continuously watch and monitor status of lifted loads
 know and follow cable and hook inspection procedures
 know and follow the local lockout and tagout procedures when servicing radio controlled equipment
 know and follow all applicable operating and maintenance manuals, safety procedures, regulatory requirements,
and industry standards and codes
The operator shall not:

lift or move more than the rated load

operate the material handling equipment if the direction of travel or function engaged does not agree with what is
indicated on the controller

use the crane, hoist or lifting device to lift, support or transport people

lift or carry any loads over people

operate the crane, hoist or lifting device unless all persons, including the operator, are and remain clear of the
supported load and any potential pinch points

operate a crane, hoist or lifting device when the device is not centered over the load
Flex 12EX System Instruction Manual
December 2013
Page 9 of 48