Entering Web Server Settings And Setting Up Access Point Help - Cisco Aironet 1200 Series Software Configuration Manual

Server Setup
DHCP Class Identifier

Entering Web Server Settings and Setting Up Access Point Help

Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-50
Your DHCP server can be set up to send responses according to the group to which
a device belongs. Use this field to enter the access point's group name. The DHCP
server uses the group name to determine the response to send to the access point.
The access point's DHCP class identifier is a vendor class identifier.
You use the Web Server Setup page to enable browsing to the web-based
management system, specify the location of the access point Help files, and enter
settings for a custom-tailored web system for access point management.
Figure 3-21 shows the Web Server Setup page:
Figure 3-21 Web Server Setup Page
Follow this link path to reach the Web Server Setup page:
1. On the Summary Status page, click Setup.
On the Setup page, click Web Server under Services.
2.
Chapter 3 Configuration
OL-2159-01