Chapter 5: Setting Up The Wireless-G Access Point With Srx; Overview; Using The Setup Wizard; Figure 5-1: Welcome Screen - Cisco Linksys WAP54GX User Manual

Wireless-G Access Point with SRX
Chapter 5: Setting up the Wireless-G Access Point with
SRX

Overview

Now that you've connected the Access Point to your wired network, you are ready to begin setting it up. This
Setup Wizard will take you through all the steps necessary to configure the Access Point.

Using the Setup Wizard

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
2. On the Welcome screen, click the Click Here to Start button if this is the first time you are running the Setup
Wizard. These are your other choices:
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.

Chapter 5: Setting up the Wireless-G Access Point with SRX

Overview

Figure 5-1: Welcome Screen

9