FLIR Nexus Configuration Manual page 40

3 Advanced Configuration
In the Joystick settings, the Mode parameter, when set to FOV Dependant, allows a pan/tilt camera to
adjust the pan speed automatically, depending on the current field of view (FOV). For a narrow FOV,
the camera moves more slowly. If you do not want to limit the pan speed according to the FOV, set the
parameter to Absolute.
The Pilot Mode parameter controls the direction of tilt when the joystick is moved forward or
backward. When Pilot Mode is set to yes, the camera points downward when the joystick is moved
forward, similar to the way an aircraft would move. If the mode is set to no, the joystick operates as
one would expect with a video game controller.
The parameters in the Advanced Settings are related to pan/tilt camera features including Scan Lists
and AutoPan. Refer to section 3.5.3 "Preset Map File" and section 3.5.1 "AutoPan Function" below for
more information about these features.
If any of the parameters for SerialRemote 1 are changed, click Save to save the changes. Generally
most of the other Serial Remote parameters which were not specifically described above do not need
to be changed (for SerialRemote 1 and SerialRemote 2, it is ok if the Enabled parameter is set to no).
If the Bosch protocol is to be used instead, select SerialRemote 2 and wait for the page to refresh,
and then configure the Remote Port Settings such as Speed (baud rate), Data Bits, Parity and Stop
3-8 427-0030-00-28 Version 110 Jun 2013