FLIR Nexus Configuration Manual page 15

2 Basic Operation and Configuration
through a "macro" interface which can be programmed through XML commands. For additional
information contact FLIR Technical Support for information about the Nexus XML-Based Control
Interfaces.
427-0030-00-28 Version 110
Function
Some cameras have additional features or functions which can be accessed using an
extra numeric function keypad. It is possible to create customized camera functions
When the Function button is selected, the keypad changes to a numeric
keypad. As digits are selected, they are displayed below the keypad. To
execute the function, select the FN Function button again.
If an invalid function is entered, an error message appears below the video
window ("Function is not available in current mode."). To return to the
Control Panel, select the Back button (left arrow).
Goto Preset
A camera can have a set of predetermined pan/tilt locations, each of which is known as a
"preset". For example, a preset may be configured for each of the locations where security
surveillance is most needed, such as a gate, doorway, and other point of access.
When the Goto Preset button is selected, the keypad changes to a numeric
keypad. As digits are selected, they are displayed below the keypad. To
cause the camera to go to the entered preset, select the Goto Preset button
again.
To return to the Control Panel, select the Back button (left arrow).
Jun 2013 2-7