Maintenance Menu - FLIR Nexus Configuration Manual

2 Basic Operation and Configuration
Note
In most installations, the only camera settings needed are available from the Live Video page (using
Scene Presets or Polarity). Use caution when modifying the camera settings described in this
section. Some settings may adversely affect the thermal image over time or may completely disable
the camera or the network interface.
change the login passwords. The Maintenance menu also provides access to many other
configuration options.
2.7.1
Initially, when the Maintenance page is selected, the Server Status page is displayed. The page
provides an indication of the current server status (either running or stopped) and buttons for starting
or stopping the server or for rebooting the system.
Note, In order to make some configuration changes through the Maintenance menu, it is necessary
to save the changes, then stop and restart the server to make the changes take effect.
The basic camera configuration steps are accessed through the Maintenance menu, using the
Server submenu on the left side of the page.The LAN Settings, Services, and Security Options
selections are described below. Generally with these settings it is necessary to save the changes to
make them effective, but it is not necessary to stop and restart the server.
When the Maintenance menu is selected, the following Server Status page appears.
427-0030-00-28 Version 110

Maintenance Menu

When a user logs in as admin, a third menu called Maintenance
is available. It is possible to use settings on the Maintenance
menu to modify the network settings, including the IP address of
the camera. It is also possible to use the Maintenance menu to
Jun 2013 2-11