Inspire LEG PRESS 2 OPTION Assembly & Operation Manual page 21

Rubber Bumper Pads
Step 13: Install Two Adjustable Bumpers.
Step 14: Attach Foot Plates to Press Arms with Rubber Bumper Pads towards top
as follows, tighten bolts first, then install and tighten Thin Lock Nuts using:
Step 15: Foot Plate Stop Adjustment:
To adjust Foot Plate Stop angle, loosen jam nut, screw in or out the
Adjustable Bumper, and retighten the Jam Nut.
STEP 14
4 – 3/8" Barrel Spacers
4 – 1" Button Head Bolts
4 – 3/8" Small OD Washers
4 – 3/8" Thin Lock Nuts
STEP 13
STEP 15
(Tighten Bolts with 6mm Allen Wrench)
Page 19
3/8" Barrel Spacer
Foot Plates
Four (3/8" Barrel Spacers)
Four (3/8" x 1" Button Head Bolts)
Four (3/8" Small OD Washers)
Four (3/8" Thin Lock Nuts)
Press Arms