Inspire LEG PRESS 2 OPTION Assembly & Operation Manual page 12

STEP 6
2 – 5" Hex Bolts
4 – 3/8" Flat Washers
2 – 3/8" Lock Nuts
Leg Press Base
Step 4: Attach Attachment Arm and Swivel Pulley Bracket to Home Gym using:
(Finger Tighten Only)
Step 5: Attach Attachment Arm to Main Upright using:
Note: Re-install Pulley 1 & 1" Barrel Spacer
in original location
(Finger Tighten Only)
Step 6: Attach Leg Press Base to Attachment Arm using: Two
(Wrench Tighten all Bolts in Steps 4 - 6 Now)
1 – 4 ¾" Hex Bolt
1 – 3/8" Flat Washer
Attachment Arm
Page 10
5/16" Barrel Spacer
1 – 3 ¾" Hex Bolt
1 – 5/16" Barrel Spacer
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
1 – 3 ½" Pulley
1 – 1" Barrel Spacer
STEP 4
2 – 4 ¼" Hex Bolts
4 – 3/8" Flat Washers
Home Gym
2 – 3/8" Lock Nuts
Two (3/8" x 4 ¼" Hex Bolts)
Four (3/8" Flat Washers)
Two (3/8" Lock Nuts)
One (3/8" x 3 ¾" Hex Bolt)
One (5/16" Barrel Spacer)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
One (3 ½" Pulley)
One (1" Barrel Spacer)
(3/8" x 5" Hex Bolts)
One (4 ¾" Hex Bolt)
Five (3/8" Flat Washers)
Two (3/8" Lock Nuts)
STEP 5