Inspire LEG PRESS 2 OPTION Assembly & Operation Manual page 10

Table of Contents

Advertisement

STEP 5
1 – 3 ½" Pulley
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
Step 4: Attach Pulley 8 to Attachment Arm using:
One (3 ½" Pulley)
Two (3/8" Flat Washers)
Step 5: Attach Pulley 9 to Floating Dual Pulley Bracket using:
One (3 ½" Pulley)
Two (3/8" Flat Washers)
Step 6: Thread Home Gym Lower Cable around Pulleys 8 & 9 and attach cable eyelet end to
Attachment Arm (bottom hole) using:
One (3/8" x 2" Hex Bolt)
One (3/8" Lock Nut)
Step 7: Attach Retainer Bolt to Attachment Arm using:
One (3/8" x 2" Hex Bolt)
One (3/8" Lock Nut)
(Make sure that the cable is routed between pulley 8 and the cable retainer bolt.)
Assembly Steps are continued on page 15
(Wrench Tighten Bolts in Steps 4-7 Now)
STEP 4
1 – 3 ½" Pulley
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
Pulley-9
Floating Dual
Pulley Bracket
Page 8
Pulley-8
STEP 6
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
STEP 7
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
One (3/8" x 2" Hex Bolt)
One (3/8" Lock Nut)
One (3/8" x 2" Hex Bolt)
One (3/8" Lock Nut)
Two (3/8" Flat Washers)
Two (3/8" Flat Washers)
Cable
Retainer
Bolt

Advertisement

Table of Contents
loading

Table of Contents