ESIE12-06
2.3
MAIN/SUB Setting
Introduction
To set the wireless remote controller, you have to set the address for:
The receiver of the wireless remote controller
The wireless remote controller.
Setting the Address for the Receiver
When using both a wired and a wireless remote controller for 1 indoor unit, the wired controller
should be set to MAIN. Therefore, set the MAIN/SUB switch (SS1) of the receiver to SUB.
Remote Controller
MAIN/SUB
MAIN
MAIN/SUB
S
switch (SS1)
M
SUB
S
M
Wireless Remote Controller
89