ZyXEL Communications XS-3900-48F User Manual page 93

Table 25 Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup
LABEL
Ethernet-type
VID
Priority
Add
Cancel
Index
Active
Port
Name
Ethernet-type
VID
Priority
Delete
Cancel
7.5.6.2 Create an IP-based VLAN Example
This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these
steps using the screen below:
Activate this protocol based VLAN.
1
Type the port number you want to include in this protocol based VLAN. Type 1.
2
Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
3
Select the protocol. Leave the default value IP.
4
Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID
5
of 5. Type 5.
XS3900-48F User's Guide
DESCRIPTION
Use the drop down list box to select a predefined protocol to be included in this protocol
based VLAN or select Others and type the protocol number in hexadecimal notation. For
example, the IP protocol in hexadecimal notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed to be
used for protocol based VLANs.
Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you
defined in the Advanced Applications > VLAN screens.
Select the priority level that the Switch will assign to frames belonging to this VLAN.
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
This is the index number identifying this protocol based VLAN. Click on any of these numbers
to edit an existing protocol based VLAN.
This field shows whether the protocol based VLAN is active or not.
This field shows which port belongs to this protocol based VLAN.
This field shows the name the protocol based VLAN.
This field shows which Ethernet protocol is part of this protocol based VLAN.
This field shows the VLAN ID of the port.
This field shows the priority which is assigned to frames belonging to this protocol based
VLAN.
Click this to delete the protocol based VLANs which you marked for deletion.
Click Cancel to begin configuring this screen afresh.
Chapter 7 VLAN
93