ZyXEL Communications XS-3900-48F User Manual page 281

Table 132 AAA Traps (continued)
OPTION OBJECT LABEL
accounting RADIUSAcctNotReachableEventOn
RADIUSAcctNotReachableEventClear 1.3.6.1.4.1.890.1.5.8.74.31.2.2
Table 133 SNMP IP Traps
OPTION OBJECT LABEL
ping pingProbeFailed
pingTestFailed
pingTestCompleted
traceroute traceRouteTestFailed
traceRouteTestCompleted
Table 134 SNMP Switch Traps
OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm
cfm dot1agCfmFaultAlarm
XS3900-48F User's Guide
OBJECT ID
1.3.6.1.4.1.890.1.5.8.74.31.2.1
OBJECT ID DESCRIPTION
1.3.6.1.2.1.80.0.1 This trap is sent when a single ping probe fails.
1.3.6.1.2.1.80.0.2 This trap is sent when a ping test (consisting of a
series of ping probes) fails.
1.3.6.1.2.1.80.0.3 This trap is sent when a ping test is completed.
1.3.6.1.2.1.81.0.2 This trap is sent when a traceroute test fails.
1.3.6.1.2.1.81.0.3 This trap is sent when a traceroute test is
completed.
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.74.35.2.1 This trap is sent when the MRSTP root
1.3.6.1.4.1.890.1.5.8.74.107.7
0.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.74.35.2.2 This trap is sent when the MRSTP topology
1.3.6.1.4.1.890.1.5.8.74.107.7
0.2
1.3.6.1.4.1.890.1.5.8.74.31.2.1 This trap is sent when more than 99% of
1.3.6.1.4.1.890.1.5.8.74.31.2.2 This trap is sent when less than 95% of the
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.111.2.802.1.1.8.0.1
Chapter 36 Access Control
DESCRIPTION
This trap is sent when there is no
response message from the
RADIUS accounting server.
This trap is sent when the
RADIUS accounting server can be
reached.
DESCRIPTION
This trap is sent when the STP root switch
changes.
switch changes.
This trap is sent when the MSTP root switch
changes.
This trap is sent when the STP topology
changes.
changes.
This trap is sent when the MSTP root switch
changes.
the MAC table is used.
MAC table is used.
This trap is sent when a variable goes over
the RMON "rising" threshold.
This trap is sent when the variable falls
below the RMON "falling" threshold.
The trap is sent when the Switch detects a
connectivity fault.
281