ZyXEL Communications XS-3900-48F User Manual page 248

Chapter 30 Error Disable
Table 112 Advanced Application > Errdisable > Errdisable Recovery (continued)
LABEL
Timer Status
Interval
Apply
Cancel
248
DESCRIPTION
Select this option to allow the Switch to wait for the specified time interval to activate a port
or allow specific packets on a port, after the error was gone. Deselect this option to turn off
this rule.
Enter the number of seconds (from 30 to 2592000) for the time interval.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
XS3900-48F User's Guide