ZyXEL Communications XS-3900-48F User Manual page 252

Chapter 31 Private VLAN
Table 115 Advanced Application > Private VLAN (continued)
LABEL
Associated VLAN
Tagged
Apply
Cancel
252
DESCRIPTION
Enter the VLAN ID of a previously created VLAN here.
Note: The VLAN ID and Mode selected here must be the same as the VLAN ID and
created in Advanced Application > VLAN > Static VLAN.
VLAN Type
A VLAN ID tag identifies VLAN membership of a frame across switches.
Select this if the VLAN includes ports on multiple switches. The Switch forwards tagged
frames through this port; it adds the PVID to untagged frames before sending them
out.
Clear this if the VLAN includes ports on this Switch only. The Switch forwards untagged
frames through this port; it removes the VLAN ID from tagged frames before sending
them out.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
XS3900-48F User's Guide