Dhcp Snooping Configure - ZyXEL Communications XS-3900-48F User Manual

48-port 10gbe top-of-rack switch with 4-port 40gbe uplink
Table of Contents

Advertisement

Table 85 DHCP Snooping (continued)
LABEL
Last ignored bindings
counters
Binding collisions
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans
Last ignored time
Total ignored bindings
counters
Binding collisions
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans

24.5 DHCP Snooping Configure

Use this screen to enable DHCP snooping on the Switch (not on specific VLAN), specify the VLAN
where the default DHCP server is located, and configure the DHCP snooping database. The DHCP
snooping database stores the current bindings on a secure, external TFTP server so that they are
XS3900-48F User's Guide
DESCRIPTION
This section displays the number of times and the reasons the Switch ignored
bindings the last time it read bindings from the DHCP binding database. You can
clear these counters by restarting the Switch or using CLI commands. See the
Ethernet Switch CLI Reference Guide.
This field displays the number of bindings the Switch ignored because the Switch
already had a binding with the same MAC address and VLAN ID.
This field displays the number of bindings the Switch ignored because the port
number was a trusted interface or does not exist anymore.
This field displays the number of bindings the Switch ignored because the Switch
was unable to understand the binding in the DHCP binding database.
This field displays the number of bindings the Switch ignored because the lease
time had already expired.
This field displays the number of bindings the Switch ignored because the VLAN ID
does not exist anymore.
This field displays the last time the Switch ignored any bindings for any reason
from the DHCP binding database.
This section displays the reasons the Switch has ignored bindings any time it read
bindings from the DHCP binding database. You can clear these counters by
restarting the Switch or using CLI commands. See the Ethernet Switch CLI
Reference Guide.
This field displays the number of bindings the Switch has ignored because the
Switch already had a binding with the same MAC address and VLAN ID.
This field displays the number of bindings the Switch has ignored because the port
number was a trusted interface or does not exist anymore.
This field displays the number of bindings the Switch has ignored because the
Switch was unable to understand the binding in the DHCP binding database.
This field displays the number of bindings the Switch has ignored because the lease
time had already expired.
This field displays the number of bindings the Switch has ignored because the VLAN
ID does not exist anymore.
Chapter 24 IP Source Guard
209

Advertisement

Table of Contents
loading

Table of Contents