ZyXEL Communications XS-3900-48F User Manual page 67

Figure 21 Status: Port Details
The following table describes the labels in this screen.
Table 12 Status > Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
LACP
TxPkts
RxPkts
Errors
Tx KB/s
XS3900-48F User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (1000M for 1000 Mbps, 10G for 10 Gbps, and 40G for 40
Gbps) and the duplex (F for full duplex).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 11.1.3 on page 108
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the transmission speed of data sent on this port in kilobytes per second.
Chapter 5 System Status and Port Statistics
for more information).
67