Configuring Auto Registration Settings; Configuring Events; Figure 5-39 Multicast Configuration Interface; Figure 5-40 Auto Register Configuration Interface - Honeywell HEN04111 User Manual

178 | Embedded Network Video Recorder User Guide
Click Multicast in the Network configuration interface to open the Multicast configuration
interface.

Configuring Auto Registration Settings

Auto Register allows the device to automatically register to the proxy you have specified. This
allows you to use the client-end to access the NVR through the proxy. The proxy acts as a
switch. In network service, the device supports IPv4 server addresses or domains.
Click Auto Register in the Network configuration interface to open the Auto Register
configuration interface.

Configuring Events

Click the Event arrow to expand the Event selection tree.
www.honeywell.com/security
Figure 5-39 Multicast Configuration Interface
Figure 5-40 Auto Register Configuration Interface