Configuring External Alarms; Configuring For No Signal; Figure 5-46 Ipc External Alarm Configuration Interface - Honeywell HEN04111 User Manual

188 | Embedded Network Video Recorder User Guide
The configuration for Net Alarms is very similar to the configuration for Local Alarms. Please
see

Configuring External Alarms

Configure the External Alarms so that the NVR can detect alarm signals from the IP cameras.
The system does not support anti-dither and sensor type setup.
Click IPC External Alarm in the Alarm configuration interface to open the IPC External Alarm
configuration interface.
The configuration for IPC External Alarms is very similar to the configuration for Local Alarms.
Please see

Configuring for No Signal

The system can generate an alarm if the network camera goes offline.
Click No Signal in the Alarm configuration interface to open the No Signal configuration
interface.
www.honeywell.com/security
Configuring Local Alarms on page 184
Figure 5-46 IPC External Alarm Configuration Interface
Configuring Local Alarms on page 184
for more information.
for more information.