Honeywell HEN04111 User Manual page 119

When the HDD is working properly, you see an O. When an HDD error has occurred, you see
an X.
Table 3-30 HDD MANAGE Configurations
Configuration
Alarm Set
HDD Setting
Note For setting up HDD group operation:
• Each channel's records can be stored in the specified HDD Group.
• Each HDD Group can correspond to several hard disks. But a HDD can
belong to only one group. Each channel can correspond to only one hard
disk. But one HDD Group can store records from several channels.
• HDD Groups are available for read-write HDDs and self-defined disks. Other
types of hard disks can not be set as a HDD Group.
Note The current software version can set only the HDD Group operation of the
read-write HDDs. It is not for the redundancy HDD.
Configuring HDD Group Settings
1. Click HDD Setting on the HDD MANAGE configuration interface.
Description
Click Alarm Set. The Alarm Set configuration interface
appears. This interface looks just like the Abnormality
configuration interface. See
page 189.
Select the HDD mode from the dropdown list. Select from
Read-only or you can erase all the data on the HDD.
Note The system needs to reboot to activate the new
configurations.
NVR Configurations | 119
Configuring for Abnormalities on
800-18160 - A - 06/2014