Getting To Know Your Isy; Figure 1 Isy-99I Series Rear Panel - Universal Devices ISY-99i Series User Manual

A Java-enabled web browser (such as Internet Explorer or FireFox) is required to launch
the ISY's Administrative Console. The latest version of Java can be downloaded from:
http://www.java.com/getjava
A DHCP-enabled router (or other DHCP-enabled network) is recommended for easiest
installation and configuration of the ISY.
If using a non-DHCP-enabled router, or a direct connection to a computer which is not a
DHCP server using an Ethernet cross-over cable (not included), the following are required
in order to configure the ISY's network parameters:
For the ISY-99i series device you will need a null-modem serial cable and available
serial port (or USB to serial adapter) on your computer.
For the ISY-994i series device you will need a micro USB cable and available USB port
on your computer.

1.3 Getting To Know Your ISY

The ISY's front panel has several elements you should be familiar with:
The LEDs on the front of your unit show the current status of your ISY. They can also
assist with troubleshooting any issues you may be having. For more information on the
ISY's front panel LEDs and what they mean, please see Appendix A: Front Panel LEDs.
A Reset Button is located on the front of your ISY. To simply reboot your ISY, use a
sharp object to briefly press the ISY's recessed Reset Button. To factory reset your ISY,
please see Appendix B: Performing a Factory Reset.
Certain ISY-99i Series controllers include an integrated IR receiver located on the front
of the unit. This IR receiver can be used to control your home using an RC-5-capable
universal remote control.
The rear panel of the ISY features the following:

Figure 1 ISY-99i Series Rear Panel

- 2 -