Open Auto Demand / Response Module; Elk Security Module; Figure 67 Electricity Conditions; Figure 68 Elk Resources - Universal Devices ISY-99i Series User Manual

Once your Brultech meter is configured, you can use this information as Conditions in ISY
Programs. When choosing a condition, choose Module and Electricity to see all available
conditions:

Figure 67 Electricity Conditions

NOTE: Check out our ISY-994iZ Series device which contains Zigbee support for
communicating with the Brultech Electricity Meters (and more!)

3.9.4 Open Auto Demand / Response Module

Please peruse OpenADR Quick Setup Guide:
http://www.universal-
devices.com/docs/production/OpenADR Quick Setup Guide.pdf

3.9.5 ELK Security Module

While the ISY does include some ELK integration built-in, it is fairly limited in that most of
the integration must come from the ELK side. For example, you can write a program on the
ELK to turn a light on through the ISY, but you cannot write an ISY program that turns a
light on based on the state of an ELK resource.
The ELK Security Module changes that, fully integrating the ELK with the ISY allowing you
to use the ELK's available resources in your ISY programs.
The list and state of available ELK resources can be found in the main ELK tab in the Admin
Console.

Figure 68 ELK Resources

Within this tab you can choose sub-tabs to view ELK resources such as Zones (typically
motion sensors, door sensors, window sensors, etc.). You can view Outputs configured on
the ELK, and also any thermostats.
- 58 -