The Irrigation Module; Figure 71 Adding And X10 Device - Universal Devices ISY-99i Series User Manual

Type the A10/X10 device's address, name the device, then choose the appropriate device
type:

Figure 71 Adding and X10 Device

Once added, the A10/X10 device will be shown in your Admin Console's device tree and
can be organized or used in ISY Programs just like any other INSTEON device.

3.9.7 The Irrigation Module

This module is designed to calculate the amount of water that is lost from the soil and
plants and replace it with a close approximation of what was lost. Today in a world of
"Green is good" every consumable resource such as water can be better conserved with
such a tool.
The module takes the local WeatherBug data, the user settings, and calculates each day the
average water that has been lost. The user then can have programs that respond to these
calculations and apply the appropriate amount of water to replace that loss. When those
programs complete they trigger a command that lets the module know that the water has
been applied and can be subtracted from the module's tally. Each day this is done
completing the cycle of tracking the data and applying the water. During cooler times of the
year the watering days frequency will slow down, and during the warmer parts of the year
the watering frequency will ramp up to daily.
- 60 -