Conditions; Figure 42 Schedule Screen - Time & Day - Universal Devices ISY-99i Series User Manual

Or a program that would run at 10pm on weekdays:
Figure 42 Schedule Screen – Time & Day
Once your Schedule statement is as intended, click the ADD TO IF button to add it to your
program.

3.3.5 Conditions

In the Add To Program button section, click CONDITION to add a Condition to your
Program.
Conditions add other criteria to your IF statement. When adding a Condition to your
Program, be sure to choose if you would like it to be added as an AND or OR.
Types of Conditions are:
Status conditions are true if a selected INSTEON device is at the state you specify. You can
check to see if a device is ON, OFF, is NOT ON, is NOT OFF, if a dimmable device is at a
specific level, if it's greater than a specific level, etc.
ON means a device is at 100% brightness. So, if your program is checking to see if a
dimmable device is on at ANY level, check to see if it is NOT OFF instead.
- 34 -