Notifications; Adding Recipients & Changing Server Settings - Universal Devices ISY-99i Series User Manual

We highly recommend testing an IR code well to ensure it is 100% reliable with the ISY
before saving. Make sure the ISY consistently displays the code correctly when the button
is Pressed, Held, Released, etc.
When done teaching IR codes to your ISY, hit the "Leave Learning Mode" button on the top
of the screen and be sure to "Save" your changes. If you wish to revert to the last saved IR
codes stored on your ISY, hit the "Reload" button located on the bottom of your screen.

3.7 Notifications

Using Programs, you can configure the ISY to send you notifications via text message or
email. For example, the ISY could notify you if your thermostat drops below or above a
pre-defined temperature, when motion is detected in an area of your home, or when your
garage door opens unexpectedly.
3.7.1 Adding Recipients & Changing Server Settings
To configure recipients of these notifications, click on the Administrative Console's
Configuration tab, choose the Emails/Notifications sub-tab, then the Settings/Groups tap
below that.
On the bottom portion of the screen, labeled Groups, hit the Add button to create a Group
and add recipient information. Simply name your group, then hit the field under the
Recipient column to edit the recipients. A group can contain one or more recipients that
you would like to notify.
- 47 -