Introduction; What's Included; Requirements - Universal Devices ISY-99i Series User Manual

1 Introduction

Thank you for purchasing an ISY-99i / 994i Series device – Universal Devices, Inc.'s line of
intelligent, stand-alone, web-enabled INSTEON controllers.
With the ISY-99i / 994i Series, you can:
Program, configure and manage your INSTEON devices
Automate your home using sophisticated timers, triggers, and macros
Conserve energy in your home
Remotely control your home using the ISY's web interface
And, MUCH more!
This User Guide will help you to get your ISY-99i / 994i installed and configured, and will
provide links to additional resources which you may find helpful. Please read through this
guide before beginning installation.

1.1 What's Included

Depending on the package you have purchased, you should receive at a minimum:
ISY-99i or 994i Series device
(2) Standard Category 5e Ethernet patch cables
Quick Start guide
The ISY-99i / 994i Series controller also requires a Smarthome 2412S (now discontinued)
or 2413S Power-Line Modem (PLM), which is sold separately direct from Smarthome.
NOTE: If using a 2412S PLM, no separate power supply is required for the ISY since the
necessary power is supplied directly from the PLM. If using a 2413S PLM, the ISY will
require a separate power supply. If needed, use a power supply with the following specs:
5-30 VDC
300 mA minimum
Center positive 2mm male barrel jack

1.2 Requirements

The ISY requires a Smarthome 2412S (now discontinued) or 2413S Power-Line Modem
(PLM) to communicate to and from your INSTEON devices:
http://www.smarthome.com/2413s.html
- 1 -