Creating Insteon Scenes; Figure 17 Write Updates To Device - Universal Devices ISY-99i Series User Manual

To write all pending changes for a single device (without turning Automatic Writes back
on), simply right-click the device and choose Write Updates to Device:

Figure 17 Write Updates to Device

3.2.3 Creating INSTEON Scenes

Scenes are collections of INSTEON devices that react to and with one another in various
ways. Scenes are comprised of both Responders and Controllers.
Responders are devices contained within scenes that only respond to commands issued to
the scene. For example, a lamp module with a table lamp attached would likely be a
Responder to the scene. When the scene is turned on, the lamp module might turn on.
When the scene is turned off, the map module might turn off. Responders are colored blue
within a scene.
Controllers not only respond to commands issued to the scene, the also control the scene.
An example of a Controller might be a button located on a Keypad – when that Keypad
button is pressed, all members of the scene will respond as programmed. Controllers are
colored red within a scene.
- 20 -