The Isy Front Panel - Universal Devices ISY-994i Series User Manual

included), you must have a micro USB cable and available USB port on your computer to
configure the ISY's network parameters.

1.4 The ISY Front Panel

The ISY's front panel has several elements with which you should become familiar:
 The LEDs on the front of your unit show the current status of your ISY. They can also
assist with troubleshooting any issues you may be having. For more information on the
ISY's front panel LEDs, please see Appendix A: Front and Rear Panel LEDs.
 A Reset button is located on the front of your ISY. To simply reboot your ISY, use a
sharp object to briefly press the ISY's recessed Reset Button. To factory reset your ISY,
please see Appendix B: Factory Reset.
 Certain ISYs include an integrated IR receiver located on the front of the unit. This IR
receiver can be used to control your home using an RC-5-capable universal remote
control.
 Your ISY may also include an externally accessible SD card slot. Please DO NOT
remove the SD card while the ISY is running. ISY's without an external SD slot must be
opened in order to replace the SD card. For instructions on replacing your SD card,
please see Appendix C: Upgrading Your SD Card.
Figure 1: ISY Front Panel
- 3 -