To create a Scene, simply click the New Scene option under the Link Management pull-
down menu, or click the New Scene button on the ISY's toolbar.
Figure 18 New Scene Screen
Name the Scene accordingly, click OK, and your scene will appear in the left-hand pane.
To add devices to a scene, simply right-click a device, choose Add To Scene, and choose the
appropriate Scene. You can also hold the CTRL key down, click multiple devices, then right-
click and choose Add To Scene to add multiple devices at once.
Figure 19 Choose Scene Screen
If appropriate, the ISY will ask you if the device should be added to the Scene as a
Responder or a Controller. Some devices (typically devices without buttons) cannot be
Controllers.
To remove devices from a scene, simply right-click a device from within a scene and choose
Remove from Scene. To remove an entire scene, simply right-click the scene and choose
Remove Scene.
- 21 -