Program Folders; Figure 49 Flash Lights On And Off - Universal Devices ISY-99i Series User Manual

For example, to flash your driveway lights on and off 5 times, every 2 seconds, you could:

Figure 49 Flash Lights ON and OFF

Variable actions allow you to adjust the value of a defined variable within program. For
more information on Variables please see the section titled Using Variables.
Adjust Scene actions adjust the On Levels and Ramp Rates of devices or scenes. For
example, use this function to adjust scenes so that they turn on at brighter levels during the
day, and perhaps at dimmer levels during the evening. Please keep in mind that many
devices require a reboot before On Level or Ramp Rate changes take effect, so this function
may not be useful in all cases.
System actions are used to notify compatible clients of energy related alerts.
Other Actions may be available depending on what optional modules you may have
installed. For more information, see the section titled 3.9 Optional Modules.

3.3.7 Program Folders

To create a new folder, simply click the NEW FOLDER button on the bottom-left corner of
the screen. You can also create new folders by right-clicking on the program hierarchy
(left-hand side of the screen) and choosing New Folder.
Folders can be used to store Programs to help organize them by type, category, etc.
Folders can also have conditions set on them to aid in program functionality. For example,
you could create a Vacation Programs folder that contains only programs that should run
when you are on vacation. In the following example, the user turns a keypad button called
"GarageControls2E" on if they are going away on vacation. The folder is set with the
following conditions so that the contained programs will run only if that vacation keypad
button is on:
- 39 -