For example, to see if your kitchen light is at 100% brightness you could do the following:
Figure 43 Status Condition – 100% Bright
But, to see if the same light is on at ANY brightness you might do this instead:
Figure 44 Status Condition – Any Brightness
Control conditions trigger only if a specified switch is pressed. The following types of
presses are selectable (not all options available for all devices):
ON
OFF
FAST ON (double-tap ON)
FAST OFF (double-tap OFF)
FADE UP (press and hold ON)
FADE DOWN (press and hold OFF)
FADE STOP (release of a press and hold)
BRIGHT (bright button pressed)
DIM (dim button pressed)
For example if you want to trigger a program if your Kitchen switch is double-tapped ON
(FAST ON) you could do the following:
- 35 -